RM0345 datasheet(14/38 Pages) STMICROELECTRONICS

부품명	RM0345

상세설명	calibration adapter board for SPC563M64xx devices

PDF	38 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

14 / 38 page

Calibration bus interface and External Memory

RM0345

14/38

Doc ID 024080 Rev 3

4.3

Calibration bus interface

The calibration bus is made up of address bus, data bus, and bus control signals, and is

used on the calibration board to access the upon board memory.

The

calibration board supports a 16-bit de-mulitplexed calibration bus. This is derived from

the multiplexed bus on the SPC563M64xx, where the majority of address lines are derived

from the data lines (CAL_DATA on SPC563M64 device), by using an onboard external latch

controlled by the C_TS signal. The ALE functionality of this signal indicates to the external

latch when to capture the address signals

Figure 7.

SRAM schematic diagram

The Section 9: Calibration software compatibility and configuration shows the necessary

software configuration of the SPC563M64xx calibration interface.

RM0345 데이터시트(PDF) 14 Page - STMicroelectronics