| 전자부품 데이터시트 검색엔진 |
|
UM0934 데이터시트(PDF) 32 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM0934 데이터시트(HTML) 32 Page - STMicroelectronics |
|
32 / 113 page ![]() MAC layer UM0934 32/113 Doc ID 17389 Rev 2 When upper layers request a transmission through an M_Data.Request, according to the node type: ● Client and REPEATER: the node originates (IC+1) consecutive transmissions of the same MAC frame ● Server: whatever the value of the IC, the node performs only 1 transmission of the MAC frame. 4.8.2 Current credit (CC) The current credit (CC) is a 3-bit long field with an initial value equal to IC and automatically decremented by the MAC layer after each repetition. When receiving, the CC field is extracted and notified to the upper layers through the M_Data.Indication upon receipt of the first valid MAC frame within the repetition burst. Moreover, only in the case of REPEATER, does the node join the repetition by transmitting CC frames in the next time-slots. CC field is automatically decremented by the MAC layer after each repetition. 4.8.3 Delta credit (DC) Delta credit (DC) is 2 bits long and used by the system management application entity (SMAE) of the Client for credit management, while it has no meaning for a Server or a REPEATER. It represents the difference (IC-CC) of the last communication originated by the system identified by the DA address to the system identified by the SA address. When the MAC builds a long MAC frame, it receives the IC and DC credit values from the SMAE and they are usually specific to the destination address DA. The MAC fills the MAC frame header with the passed IC and DC values, while CC is equal to IC for the first transmitted frame. When a MAC frame is received, the MAC automatically decodes the IC, CC, DC values and notifies them to the upper layers (SMAE). 4.8.4 Repeater The REPEATER is basically a Server being able, in addition, to perform repetitions. A dedicated MIB object 000Bh (TIC selector and repeater state, 6.5.12) can be used to configure a Server as a REPEATER. 4.8.5 Example Figure 12 shows a repetition example. Upper layers of the Client station requests a broadcast (DA=FFFh) transmission of a MAC frame (made of a single subframe) with IC=CC=3. The Client performs the transmission of the original frame (IC=CC=3) followed by 3 repetitions, for a total amount of 4 transmissions. All the other nodes in the network (both Server and REPEATER) receive the transmissions and provide an M_Data.Indication to the local host upon receipt of the first valid MAC frame (i.e. with valid FCS), while the following transmissions are neglected (as they are detected as being repetitions). |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |