 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
AN3155 데이터시트(PDF) 17 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN3155 데이터시트(HTML) 17 Page - STMicroelectronics |
|
|
17 / 37 page  DocID17066 Rev 6 17/37 AN3155 Bootloader command set All other addresses are considered not valid and are NACKed by the device. When an application is loaded into RAM and then a jump is made to it, the program must be configured to run with an offset to avoid overlapping with the first RAM memory used by the bootloader firmware (refer to STM32 product datasheets and to the “STM32 microcontroller system memory boot mode” application note - AN2606 for more details about the RAM offset for the device you are using). The Jump to the application works only if the user application sets the vector table correctly to point to the application address. Some products may return two NACKs instead of one single NACK when Read Protection (RDP) is active (or Read Potection level 1 is active). To know if a given product returns one single NACK or two NACKs in this situation, please refer to the known limitations section relative to that product in AN2606. Figure 11. Go command: device side |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
