STR75x demonstration software

Running the demonstrations

29/34

The following message is displayed on the LCD:

Press "SEL" to exit from board self test.

Test report

This sub-menu offers the possibility of showing the result of all tests done in the "Start Test"

sub-menu.

If you select this sub-menu before starting the test, the following message is displayed on

the LCD:

After selecting this sub-menu, the result of all the board tests is displayed, it is failed if at

least one test was not correct, else passed if all tests are done successfully. The following

message is displayed on the LCD:

If some tests were failed, a second message is displayed which contains in the first line the

number of the failed test, and in the second line the name of those tests which you can

display one-by-one using the "RIGHT" and "LEFT" push buttons. The following message is

displayed on the LCD:

To exit from the "Test Report" sub-menu, press the "UP/DOWN" push button.

Press ^SEL^

UART1 UART2 Test

Board test not

done yet!!!!

Overall test

!!!xxxxxx!!!

Failed

Passed

!!!Failed!!!

xx Test

Number of

failed Test