PM0214 datasheet(184/245 Pages) STMICROELECTRONICS

184 / 245 page

Core peripherals

PM0214

184/245

DocID022708 Rev 4

4.2.4

MPU design hints and tips

To avoid unexpected behavior, disable the interrupts before updating the attributes of a

region that the interrupt handlers might access.

Ensure software uses aligned accesses of the correct size to access MPU registers:

•

Except for the RASR, it must use aligned word accesses

•

For the RASR it can use byte or aligned halfword or word accesses.

The processor does not support unaligned accesses to MPU registers.

When setting up the MPU, and if the MPU has previously been programmed, disable

unused regions to prevent any previous region settings from affecting the new MPU setup.

Recommended MPU configuration

The STM32 microcontroller system has only a single processor, so you should program the

MPU as follows:

In STM32 implementations, the shareability and cache policy attributes do not affect the

system behavior. However, using these settings for the MPU regions can make the

application code more portable. The values given are for typical situations.

Note:

The MPU attributes don't affect DMA data accesses to the memory/peripherals address

spaces. therefore, in order to protect the memory areas against inadvertent DMA accesses,

the MPU must control the SW/CPU access to the DMA registers.

Table 42. Memory region attributes for STM32

Memory region

TEX

C B S

Memory type and attributes

Flash memory

b000

0 Normal memory, Non-shareable, write-through

Internal SRAM

b000

1 Normal memory, Shareable, write-through

External SRAM

b000

1 Normal memory, Shareable, write-back, write-allocate

Peripherals

b000

1 Device memory, Shareable

PM0214 데이터시트(PDF) 184 Page - STMicroelectronics

PM0214 데이터시트(HTML) 184 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL