The detail for related code is provided in Table 3.

Table 3. Peripherals interconnect configuration detail

Interconnect

Code example

Comments

TIM8_TRGO

selection

sMasterConfig.MasterOutputTrigger=TIM_TRGO_UPDATE;

sMasterConfig.MasterSlaveMode=TIM_MASTERSLAVEMODE_DISABLE;

sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;

HAL_TIMEx_MasterConfigSynchronization(&htim8, &sMasterConfig);

Configures the Master TIM to generate

a triggering event

(TIM_TRGO_UPDATE).

ADC1

external

trigger

source

hadc1.Init.ExternalTrigConvEdge=ADC_EXTERNALTRIGCONVEDGE_RISING;

hadc1.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T8_TRGO;

hadc1.Init.DMAContinuousRequests = ENABLE;

hadc1.Init.EOCSelection = ENABLE;

HAL_ADC_Init(&hadc1);

The TIM8_TRGO event triggers

conversion for the regular group with

rising edge.

Since converted regular channel

values are stored into a unique data

register, the DMA mode is enabled.

DMA handle __HAL_LINKDMA(hadc, DMA_Handle, hdma_adc);

Associates the initialized DMA handle

to the ADC handle.