AS3955 datasheet(36/111 Pages) AMSCO

36 / 111 page

Page 36

ams Datasheet

Document Feedback

[v1-01] 2015-Apr-29

AS3955 − Detailed Description

Configuration Byte AUTH_LIM

Figure 38:

Configuration Byte AUTH_LIM

Note(s) and/or Footnote(s):

1. This byte can always be accessed for read and write via SPI / I²C and can be accessed for read and write from the RF side if chip is in

AUTHENTICATED state and configuration bit auth_set is 1.

AUTH_LIM defines the block address above which password

verification is required. Valid address range for the AUTH_LIM

byte is from 00h to FFh. If AUTH_LIM is set to a block address

higher than the last block of the EEPROM address space, the

password protection is effectively disabled. Addresses above

the limit are protected for read / write depending on auth_r and

auth_w values. If no bits are set, password protection is

disabled.

If the NFC device tries to access protected blocks without

authenticating first, then:

• If only protected blocks are accessed, AS3955 will not

respond

• If protected and unprotected blocks are accessed1,

AS3955 will return actual stored values only for the

unprotected portion, and zeroes for the protected

portion.

Conf. Bit

Name

Default

Function

Note

auth_lim<7>

AUTH_LIM defines the block address above

which password verification is required.

auth_lim<6>

auth_lim<5>

auth_lim<4>

auth_lim<3>

auth_lim<2>

auth_lim<1>

auth_lim<0>

1. This can occur, for instance, with a READ command crossing the border between protected and unprotected memory.

AS3955 데이터시트(PDF) 36 Page - ams AG

AS3955 데이터시트(HTML) 36 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL