| 전자부품 데이터시트 검색엔진 |
|
ST25TA02K-PC6C5 데이터시트(PDF) 12 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST25TA02K-PC6C5 데이터시트(HTML) 12 Page - STMicroelectronics |
|
12 / 64 page ![]() Signal descriptions ST25TA02K-P 12/64 DocID027794 Rev 2 2.4 General Purpose Output (GPO) The GPO pad is a CMOS pad, with default polarity set to 0. This pad is a configurable output signal, driven to the alternate polarity when configured event occurs. Its behavior is consistent with the RF session activated and with the mode chosen by the user. The user can select one of these configurations(a): • SessionOpen: an RF session is ongoing. • MIP (NDEF Message updating In Progress): the RF host is writing an NDEF length different from 0x0000. This mode can be used to detect when the RF host changes the NDEF message as defined by the NFC Forum. • WIP (Writing In Progress): the ST25TA02K-P is executing a writing operation. • INT (interrupt): the RF host can force the ST25TA02K-P to send an alternate pulse on the GPO pin. • State mode: the RF host can control the state of the GPO pad during the RF session. • RF busy: an RF host is communicating with the ST25TA02K-P. • Field detection: the RF field is sufficient to establish an RF communication with the ST25TA02K-P. GPO configuration byte can be locked, by setting its Most Significant Bit to 1 (1xxx 0000 b). Once locked, this byte cannot be changed anymore. a. See Table 60: GPO timings measurement for more details. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |