TS3USB3000

SCDS337B – DECEMBER 2012 – REVISED DECEMBER 2015

www.ti.com

Typical Application (continued)

9.2.2 Detailed Design Procedure

The TS3USB3000 can be properly operated without any external components. However, TI recommends that

unused pins must be connected to ground through a 50-

Ω resistor to prevent signal reflections back into the

device.

9.2.3 Application Curves

Figure 16. Eye Pattern: 0.7 Gbps With No Device

Figure 17. Time Interval Error Histogram: 0.7 Gbps With

No Device

The TS3USB3000 contributes only 8.4 ps of peak-to-peak jitter

for 0.7-Gbps data rate.

The TS3USB3000 contributes only 8.4 ps of peak-to-peak jitter

for 0.7-Gbps data rate.

Figure 19. Time Interval Error Histogram: 0.7 Gbps for

Figure 18. Eye Pattern: 0.7 Gbps for MHL Switch

MHL Switch

14

Submit Documentation Feedback

Copyright © 2012–2015, Texas Instruments Incorporated

Product Folder Links: TS3USB3000