| 전자부품 데이터시트 검색엔진 |
|
ST-PLC-AFE 데이터시트(PDF) 28 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST-PLC-AFE 데이터시트(HTML) 28 Page - STMicroelectronics |
|
28 / 58 page ![]() SPI interfaces ST-PLC-AFE 28/58 DocID028727 Rev 1 6 SPI interfaces The ST-PLC-AFE interface supports SPI mode 0.0 and 1.1. A host SPI frame consists of a read/write bit, a 3-bit register address, and a 12-data bit register. Data are shifted out on the falling edge of the SCLK and latched on the rising edge of the SCLK. Refer to Section 6.1: SPI timing for a valid host and SPI communication protocol. When nCS = 1, the state machine is reset asynchronously to the R/W state. The nCS does not need to go high between transfers but, it must be low during the entire transfer. Address bits identify target registers for writing data. There are three address bits which allow 8 x 12 bit registers, including the DAC register. Received data are stored in the target register on the 16th edge of the SCLK, if R/W is low. 6.1 SPI timing Figure 12. SPI mode 0.0 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |