XIO2001IPNP datasheet(73/141 Pages) TI1

73 / 141 page

XIO2001

www.ti.com

SCPS212I – MAY 2009 – REVISED JANUARY 2016

Product Folder Links: XIO2001

Submit Documentation Feedback

8.4.61 GPIO Data Register

This register reads the state of the input mode GPIO terminals and changes the state of the output mode GPIO

terminals. Writing to a bit that is in input mode or is enabled for a secondary function is ignored. The secondary

functions share GPIO0 (CLKRUN), GPIO1 (PWR_OVRD), GPIO3 (SDA), and GPIO4 (SCL). The default value at

power up depends on the state of the GPIO terminals as they default to general-purpose inputs. See Table 44 for

a complete description of the register contents.

PCI register offset:

B6h

Read-only, Read/Write

Default value:

00XXh

BIT NUMBER

RESET STATE

(1)

These bits are reset by a PCI Express reset (PERST), a GRST, or the internally-generated power-on reset.

Table 44. GPIO Data Register Description

BIT

FIELD NAME

ACCESS

DESCRIPTION

15:5

RSVD

Reserved. Returns 000h when read.

4(1)

GPIO4_DATA

GPIO 4 data. This bit reads the state of GPIO4 when in input mode or changes the state of

GPIO4 when in output mode.

3(1)

GPIO3_DATA

GPIO 3 data. This bit reads the state of GPIO3 when in input mode or changes the state of

GPIO3 when in output mode.

2(1)

GPIO2_DATA

GPIO 2 data. This bit reads the state of GPIO2 when in input mode or changes the state of

GPIO2 when in output mode.

1(1)

GPIO1_DATA

GPIO 1 data. This bit reads the state of GPIO1 when in input mode or changes the state of

GPIO1 when in output mode.

0(1)

GPIO0_DATA

GPIO 0 data. This bit reads the state of GPIO0 when in input mode or changes the state of

GPIO0 when in output mode.

8.4.62 TL Control and Diagnostic Register 0

The contents of this register are used for monitoring status and controlling behavior of the bridge. See Table 45

for a complete description of the register contents. It is recommended that all values within this register be left at

the default value. Improperly programming fields in this register may cause interoperability or other problems.

PCI register offset:

C0h

Read/Write

Default value:

0000 0001h

BIT NUMBER

RESET STATE

BIT NUMBER

RESET STATE

(1)

These bits are reset by a PCI Express reset (PERST), a GRST, or the internally-generated power-on reset.

Table 45. Control and Diagnostic Register 0 Description

BIT

FIELD NAME

ACCES

DESCRIPTION

31:24(1)

PRI_BUS_NUM

This field contains the captured primary bus number.

23:19(1)

PRI_DEVICE_ NUM

This field contains the captured primary device number.

XIO2001IPNP 데이터시트(PDF) 73 Page - Texas Instruments

XIO2001IPNP 데이터시트(HTML) 73 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL