STM32F479AI datasheet(156/208 Pages) STMICROELECTRONICS

부품명	STM32F479AI

상세설명	8- to 14-bit parallel camera interface up to 54 Mbytes

PDF	208 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

156 / 208 page

Electrical characteristics

STM32F479xx

156/208

DocID028010 Rev 2

Figure 52. ADC accuracy characteristics

1. See also Table 79.

2. Example of an actual transfer curve.

3. Ideal transfer curve.

4. End point correlation line.

5. ET = Total Unadjusted Error: maximum deviation between the actual and the ideal transfer curves.

EO = Offset Error: deviation between the first actual transition and the first ideal one.

EG = Gain Error: deviation between the last ideal transition and the last actual one.

ED = Differential Linearity Error: maximum deviation between actual steps and the ideal one.

EL = Integral Linearity Error: maximum deviation between any actual transition and the end point

correlation line.

Figure 53. Typical connection diagram using the ADC

1. Refer to Table 77 for the values of RAIN, RADC and CADC.

2. Cparasitic represents the capacitance of the PCB (dependent on soldering and PCB layout quality) plus the

pad capacitance (roughly 5 pF). A high Cparasitic value downgrades conversion accuracy. To remedy this,

fADC should be reduced.

STM32F479AI 데이터시트(PDF) 156 Page - STMicroelectronics