 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
GS6151 데이터시트(PDF) 39 Page - Semtech Corporation |
|
|
|||||||||||||||||||||||||||||
GS6151 데이터시트(HTML) 39 Page - Semtech Corporation |
|
|
39 / 77 page  GS6151 Final Data Sheet Rev.4 PDS-060389 August 2015 39 of 77 Semtech Proprietary & Confidential www.semtech.com The steps required for the application host processor to write to the Configuration and Status Registers via the GSPI, are as follows: 1. Set Command Word for write access (R/W = 0) to the local registers 0h-80h; set Auto Increment; set the Unit Address field in the Command Word to match the configured DEVICE_UNIT_ADDRESS which will be zero. Write the Command Word. 2. Write the Data Word to be written to the first register. 3. Write the Data Word to be written to the next register in Auto Increment mode, etc. Read access is the same as the above with the exception of step 1, where the Command Word is set for read access (R/W = 1). Note: The UNIT ADDRESS field of the Command Word must always match DEVICE_UNIT_ADDRESS for an access to be accepted by the device. Changing DEVICE_UNIT_ADDRESS to a value other than 0 is only required if multiple devices are connected to a single chip select (in Loop-Through or Bus-Through configuration.) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
