| 전자부품 데이터시트 검색엔진 |
|
DAC7760IPWPR 데이터시트(PDF) 35 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
DAC7760IPWPR 데이터시트(HTML) 35 Page - Texas Instruments |
|
35 / 63 page ![]() 35 DAC7760, DAC8760 www.ti.com SBAS528B – JUNE 2013 – REVISED JUNE 2016 Product Folder Links: DAC7760 DAC8760 Submit Documentation Feedback Copyright © 2013–2016, Texas Instruments Incorporated 8.4 Device Functional Modes 8.4.1 Setting Voltage and Current Output Ranges For voltage and current outputs in normal mode (VOUT and IOUT are not simultaneously enabled), the output range is set according to Table 7. (1) RANGE bits cannot be programmed to 0x100. Previous value is held when this command is written. Table 7. RANGE Bits vs Output Range RANGE OUTPUT RANGE 000 0 V to +5 V 001 0 V to +10 V 010 ±5 V 011 ±10 V 100 Not allowed(1) 101 4 mA to 20 mA 110 0 mA to 20 mA 111 0 mA to 24 mA Note that changing the RANGE bits at any time causes the DAC data register to be cleared based on the value of CLR-SEL (pin or register bit) and the new value of the RANGE bits. In addition to the RANGE bits, the OVR bit extends the voltage output range by 10%. if the OVR bit is set, the voltage output range follows Table 8, as long as there is headroom with the supply. Table 8. Voltage Output Overrange VOLTAGE OUTPUT RANGE VOLTAGE OUTPUT OVERRANGE 0 V to 5 V 0 V to 5.5 V 0 V to 10 V 0 V to +11 V ±5 V ±5.5 V ±10 V ±11 V When VOUT and IOUT are simultaneously enabled (dual-output mode) by setting the DUAL OUTEN bit in the Configuration Register, the voltage output is controlled by the RANGE bits in the Control Register (see Table 9), and the current output is controlled by the IOUT RANGE bits in the Configuration Register (see Table 10). (1) RANGE bits cannot be programmed to 0x100. Previous value is held when this command is written. Table 9. RANGE Bits versus Voltage Output Range in Dual-Output Mode RANGE OUTPUT RANGE 000 0 V to +5 V 001 0 V to +10 V 010 ±5 V 011 ±10 V 100 Not allowed(1) 1xx Disabled Table 10. IOUT RANGE Bits vs Current Output Range in Dual-Output Mode RANGE OUTPUT RANGE 00 Disabled 01 4 mA to 20 mA 10 0 mA to 20 mA 11 0 mA to 24 mA |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |