CDCE421RGET datasheet(2/24 Pages) TI1

2 / 24 page

DESCRIPTION

xtal +

OutputDivider

FeedbackDivider

fout

(1)

Crystal

Oscillator

Feedback

Divider

12,16,20and32

Output

Divider

1,2,4,8,16and32

PFD/

ChargePump

Prescaler

2,3,4and5

LoopFilter

VCO1

1890

VCO2

2200

XIN1

XIN2

SDATA

B0217-01

1-Pin

Interface

and

Control

EEPROM

LVPCL

LVDS

CDCE421

SCAS842B – APRIL 2007 – REVISED JANUARY 2009..................................................................................................................................................... www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

The CDCE421 is a high-performance, low-phase-noise clock generator. It has two fully integrated, low-noise,

LC-based voltage controlled oscillators (VCOs) that operate in the 1.750-GHz to 2.350-GHz frequency range. It

has an integrated crystal oscillator that operates in conjunction with an external AT-cut crystal to produce a

stable frequency reference for the PLL-based frequency synthesizer.

The output frequency (fout) is proportional to the frequency of the input crystal (fxtal). The prescaler divider,

feedback divider, output divider, and VCO selection are what set (fout) with respect to (fxtal). For a desired

frequency (fout), look in Table 1 and find the corresponding settings in the same row. Use Equation 1 to calculate

the exact crystal oscillator frequency needed for the desired output.

Output divider(1) = 1, 2, 4, 8, 16, or 32

Feedback divider(2) = 12, 16, 20, or 32

(1)Output divider and feedback divider should be from the same row in Table 1.

(2)Feedback divider is set automatically with respect to the prescaler setting in Table 1.

A high-level block diagram of the CDCE421 is shown in Figure 1.

The CDCE421 supports one differential LVDS clock output or one differential LVPECL output.

All device settings are programmable through a Texas Instruments proprietary simple serial interface.

The device operates in a 3.3-V supply environment and is characterized for operation from –40°C to +85°C.

The CDCE421 is available in a QFN-24 package.

Figure 1. High-Level Block Diagram of the CDCE421

In the CDCE421, the feedback divider is set automatically with respect to the prescaler setting. The product of

the prescaler and the feedback divider will be either 60 or 64, as shown in Table 1, to keep the control loop

stable.

Submit Documentation Feedback

Product Folder Link(s): CDCE421

CDCE421RGET 데이터시트(PDF) 2 Page - Texas Instruments

CDCE421RGET 데이터시트(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

데이터시트 다운로드

링크 URL