OUTPUTS (LVPECL OR LVDS)

ABSOLUTE MAXIMUM RATINGS

(1)

RECOMMENDED OPERATING CONDITIONS

CDCE421

The CDCE421 device has two sets of output drivers, LVPECL and LVDS, where the outputs are wire-ORed

together. Only one output can be selected at a time; the other goes to the high-impedance state (Hi-Z).

If the device is configured for an LVPECL, the output buffers go to Hi-Z and the termination resistors determine

the state of the output (LVPECLP = LVPECLN = Hi-Z) in the device disable mode (CE = L). If the device is

configured in LVDS mode, the outputs go to Hi-Z if the device is disabled (CE = L).

Over operating free-air temperature range (unless otherwise noted).

VALUE

UNIT

–0.5 to 4.6

V

V

Output current for LVPECL

–50

mA

Electrostatic discharge (HBM)

2

kV

Characterized free-air temperature range (no airflow)

–40 to +85

°C

Maximum junction temperature

+125

°C

Storage temperature range

–65 to +150

°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values are with respect to network ground terminal.

Over operating free-air temperature range (unless otherwise noted).

MIN

TYP

MAX

UNIT

Supply voltage

3

3.3

3.6

V

Ambient temperature (no airflow, no heat sink)

–40

+85

°C

12

Submit Documentation Feedback

Copyright © 2007–2009, Texas Instruments Incorporated

Product Folder Link(s): CDCE421