| 전자부품 데이터시트 검색엔진 |
|
DA9155M 데이터시트(PDF) 23 Page - Dialog Semiconductor |
|
|
|||||||||||||||||||||||||||||
DA9155M 데이터시트(HTML) 23 Page - Dialog Semiconductor |
|
23 / 36 page ![]() DA9155M 2.5 A Companion Charger for rapid charging Figure 19: Junction temperature monitoring of DA9155M 10.8 Power modes The power modes of DA9155M are illustrated in Figure 20. Disabled Reset Active functions: • VIN-VBAT comparator • Bandgap • VIN comparator • VBAT comparator • TJUNC comparator • VDDCORE LDO • Internal oscillator • OTP controller • All outputs inactive OTP read done && VIN > VIN_UVLO && TJUNC < TJUNC_CRIT Active EN == 0 || VBAT <= VBAT_UV || VBAT >= VBAT_OV || VIN <= VIN_DROP || VIN <= VIN_UVLO || VIN >= VIN_OVLO || E_CHG_TIMEOUT || TJUNC >= TJUNC_CRIT EN == 1 && VBAT > VBAT_UV && VBAT < VBAT_OV && VIN > VIN_DROP && VIN > VIN_UVLO && VIN < VIN_OVLO && TJUNC < TJUNC_CRIT && IOVDD_OK == 1 TJUNC > TJUNC_POR Any state VIN < VIN2BAT No-Power (5 µA) Active functions: • VIN-VBAT comparator • All outputs inactive VIN > VIN2BAT Any state Active functions: • VIN-VBAT comparator • Bandgap • VIN comparator • VBAT comparator • TJUNC comparator • VDDCORE LDO • Internal oscillator • I2C Active functions: • VIN-VBAT comparator • Bandgap • VIN comparator • VBAT comparator • TJUNC comparator • VDDCORE LDO • Internal oscillator • I2C • Buck Figure 20: Power modes of DA9155M. The conditions for state transitions follow the C- language syntax. 10.8.1 No-power The no-power mode is the initial state of DA9155M. Only the VIN-VBAT comparator is active in this state. When VIN rises above VBAT, DA9155M enters the reset mode. All IOs are in their inactive state. The no-power mode is entered whenever VIN drops below VBAT. 10.8.2 Reset DA9155M enters the reset mode when a power supply is attached and VIN rises above VBAT. In the reset mode, DA9155M will enable the internal reference, the internal supply, execute the reset sequence, and read the OTP. Once the OTP is read and all the VIN conditions are met, DA9155M moves automatically to the disabled mode. TEMP_CRIT TEMP_WARN VBE TEST[1:0] VCORE VCORE VTWARN VTCRIT VTTEST1 VTTEST2 BGAP DIODE VOLTAGE TWARN_EN TCRIT_EN TEMP_POR VCORE TPOR_EN VTPOR VTTEST3 Datasheet v3.05 22-July-2016 CFR0011-120-00 Rev 5 23 of 36 © 2016 Dialog Semiconductor |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |