8

BMated dimensions

●Board-to-Wire Connection using

the straight pin header

BPrecautions for use

1. The connector could be damaged if it is pulled out forcibly. When it is hard to pull out, push it in slightly first and then depress

the lock and un-mate.

2. When thick, short sections of wire are used, the connector could be deformed due to the force of the wires’ position.

Route cables in such a way that they do twist when being installed.

3. Make sure to turn off the power when mating or un-mating the connector.

4. Please do not touch any area around the contact part with your hand when the power is on; it could be very dangerous.

5. Please contact Hirose representative about the assembly procedure and the instruction manual.

BRated values

Please avoid using the connectors above the ratings. Also, do not insert or pull out energized or “ live” wires.

BOperating environment

Please contact us if you are designing this connector into environmental conditions where high and low temperatures are repeated.

DF63-*S-3.96C

DF63-*P-3.96DSA

8.91

BContact Extraction

■ Intended crimp Contacts : DF63-1618SC(F), DF63-2022SC(F), DF63-1618PC(F), DF63-2022PC(F)

■ Work Method

DF63-*P-3.96DS

DF63-*S-3.96C

(20)

DF63-*S-3.96C

DF63-*EP-3.96C

(11.1)

(29.55)

●Socket to Right Angle Header Connection

●Socket to In-line Plug Connection

1.Refer to the drawing No.1. Insert

correct size contact extraction tool in

the insulator against the molded-in

lance. Deflect the lance as shown.

2.Assure that the lance is deflected to

release the contact and pull-out wire

with the terminated contact.

1

2

Contact extraction tool

Housing Cross Sectional Diagram

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 11/2015. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

®