ATtiny11 datasheet(50/61 Pages) ATMEL

50 / 61 page

Using AVR Studio

5-10

AVR STK500 User Guide

1925C–AVR–3/03

Set fuse bytes. “value” is a 16-bit hex. value describing the settings for the upper

and lower fuse.

Set extended fuse byte. “value” is an 8-bit hex. value describing the extend fuse

settings.

Verify fuse bytes. “value” is a 16-bit hex. value to verify against.

Verify extended fuse byte. “value” is an 8-bit hex. value describing the extend fuse

settings.

Read back fuse bytes.

Fill unspecified locations with a value (0x00-0xff). The default is to not program

locations not specified in the input files.

FLASH address range. Specifies the address range of operations. The default is

the entire FLASH. Byte addresses.

EEPROM address range. Specifies the address range of operations. The default

is the entire EEPROM. Byte addresses.

Select communication port; “com1” to “com8”. If this parameter is omitted the

program will scan the comm. ports for the STK500

Set target voltage VTARGET in Volts. “value” is a floating point value between 0.0

and 6.0, describing the new voltage.

Set adjustable voltage AREF in Volts. “value” is a floating point value between 0.0

and 6.0, describing the new voltage.

Get current target voltage VTARGET.

Get current adjustable voltage AREF.

Get revisions; hardware revision (h) and software revision (s).

Set oscillator frequency; “freq” is the frequency in Hz.

Get oscillator frequency.

Silent operation.

No progress indicator. For example, if piping to a file for log purposes, use this

option to avoid the non-ascii characters used for the indicator.

h|?

Help information (overrides all other settings)

Figure 5-9. Sample Usage

stk500

-dAT90S8515

-ms

-e

-pf

-vf

-iftest.hex

Erase before Program

Program Flash

Name of hex File

Select Device Number

Serial Programming Mode

Verify Device

ATtiny11 데이터시트(PDF) 50 Page - ATMEL Corporation

ATtiny11 데이터시트(HTML) 50 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

데이터시트 다운로드

링크 URL