HAL855 datasheet(74/102 Pages) MICRONAS

74 / 102 page

HAL8xy, HAL100x

APPLICATION NOTE

Programmer Board

Sept. 19, 2013; APN000046_03EN

Micronas

MODE

– The register range is from 0 up to 16383 and contains the settings for PERIOD,

FORMAT, FILTER, and RANGE:

Please refer to the data sheet for the available PERIOD, FORMAT, FILTER, and

RANGE values.

DIGITAL-READOUT

– This register is read only.

– The register range is from 0 up to 4095.

OFFSET CORRECTION

– The register range is from 0 to 31

– The MSB is set to activate the offset correction.

CURRENTSOURCE

– The register range is from 0 to 1023 and contains the settings for LOW CURRENT,

HIGH CURRENT, and SLEW RATE:

SPECIAL CUSTOMER

– The register range is from 0 to 63 and contains the settings for OUTPUT BITTIME

and PARTNUMBER ENABLE:

DEACTIVATE

– This register can only be written.

– The register has to be written with 2063 decimal (80F hexadecimal) for the deactiva-

tion.

– The sensor can be reset with an Activate pulse on the output pin or by switching off

and on the supply voltage.

MODE

PERIOD 512

FORMAT 64

FILTER 8

RANGE



CURRENTSOURCE

SLEW RATE

256

LOW CURRENT

HIGH CURR ENT



SPECIAL CUSTOMER

PARTNUMBER ENABLE

OUTPUT



BITTIME

HAL855 데이터시트(PDF) 74 Page - Micronas

HAL855 데이터시트(HTML) 74 Page - Micronas

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL