TNETV1644ZDU6 datasheet(297/306 Pages) TI1

297 / 306 page

6.24 IEEE 1149.1 JTAG

6.24.1

JTAG ID (JTAGID) Register Description(s)

TMS320DM6437

Digital Media Processor

www.ti.com

SPRS345D – NOVEMBER 2006 – REVISED JUNE 2008

The JTAG(3) interface is used for BSDL testing and emulation of the DM6437 device.

TRST only needs to be released when it is necessary to use a JTAG controller to debug the device or

exercise the device's boundary scan functionality. Note: TRST is synchronous and must be clocked by

TCK; otherwise, the boundary scan logic may not respond as expected after TRST is asserted.

For maximum reliability, DM6437 includes an internal pulldown (IPD) on the TRST pin to ensure that

TRST will always be asserted upon power up and the device's internal emulation logic will always be

properly initialized.

JTAG controllers from Texas Instruments actively drive TRST high. However, some third-party JTAG

controllers may not drive TRST high but expect the use of a pullup resistor on TRST.

When using this type of JTAG controller, assert TRST to initialize the device after powerup and externally

drive TRST high before attempting any emulation or boundary scan operations.

(3)

IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.

Table 6-114. JTAG ID (JTAGID) Register

HEX ADDRESS RANGE

ACRONYM

COMMENTS

Read-only. Provides 32-bit

0x01C4 0028

JTAGID

JTAG Identification Register

JTAG ID of the device.

The JTAG ID register is a read-only register that identifies to the customer the JTAG/Device ID. For the

DM6437 device, the JTAG ID register resides at address location 0x01C4 0028. For the actual register bit

names and their associated bit field descriptions, see Figure 6-56 and Table 6-115.

31-28

27-12

11-1

VARIANT (4-Bit)

PART NUMBER (16-Bit)

MANUFACTURER (11-Bit)

LSB

R-n

R-1011 0111 0010 0001

R-0000 0010 111

R-1

LEGEND: R = Read, W = Write, n = value at reset

Figure 6-56. JTAG ID (JTAGID) Register—0x01C4 0028

Table 6-115. JTAG ID (JTAGID) Register Selection Bit Descriptions

BIT

NAME

DESCRIPTION

31:28

VARIANT

Variant (4-Bit) value. A read from this field always returns 0b0000.

27:12

PART NUMBER

Part Number (16-Bit) value. DM6437 value: 1011 0111 0010 0001.

11-1

MANUFACTURER

Manufacturer (11-Bit) value. DM6437 value: 0000 0010 111.

LSB

LSB. This bit is read as a "1" for DM6437.

Submit Documentation Feedback

Peripheral Information and Electrical Specifications

297

TNETV1644ZDU6 데이터시트(PDF) 297 Page - Texas Instruments

TNETV1644ZDU6 데이터시트(HTML) 297 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL