TNETV1644ZDU6 datasheet(118/306 Pages) TI1

118 / 306 page

3.7.3.4

PCI Data Block

TMS320DM6437

Digital Media Processor

SPRS345D – NOVEMBER 2006 – REVISED JUNE 2008

www.ti.com

This block of 3 pins consists of 3 PCI Address/Data pins—AD30, AD28, AD26. The PINMUX1.PCIEN

As discussed in Section 3.7.3.2, Peripherals Spanning Multiple Pin Mux Blocks, PCI pins span across the

following Pin Mux Blocks: Host Block, EMIFA/VPSS Block Sub-Block 0 and Sub-Block 3, PCI Data Block,

and GPIO Block. For proper PCI operation, PCI must be selected in all of these Pin Mux Blocks.

The 3 pins in the PCI Data Block are not muxed with any other peripherals. However, the

PINMUX1.PCIEN field controls the internal pullup/pulldown resistors on these pins. For PCI operation

(PCIEN = 1), the internal pullup/pulldown resistors are disabled. If the device does not support PCI

(PCIEN = 0), the internal pullup/pulldown resistors on these pins are enabled so that the user can leave

these pins unconnected on the board.

Table 3-24 shows the Host Block pin selection based on PINMUX1.PCIEN setting.

Table 3-24. PCI Data Block Pin Control

PINMUX1.PCIEN

BLOCK FUNCTION

RESULTING PIN FUNCTIONS

No Connect Pins

(Default if PCIEN = 0)

Internal pullup/pulldown enabled. Leave these three pins unconnected on the board.

PCI

PCI: AD26, AD28, AD30

(Default if PCIEN = 1)

Device Configurations

118

Submit Documentation Feedback

TNETV1644ZDU6 데이터시트(PDF) 118 Page - Texas Instruments