전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

UM1537 데이터시트(PDF) 13 Page - STMicroelectronics

부품명 UM1537
상세설명  STM320518-EVAL evaluation board
PDF  52 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

UM1537 데이터시트(HTML) 13 Page - STMicroelectronics

Back Button UM1537 Datasheet HTML 9Page - STMicroelectronics UM1537 Datasheet HTML 10Page - STMicroelectronics UM1537 Datasheet HTML 11Page - STMicroelectronics UM1537 Datasheet HTML 12Page - STMicroelectronics UM1537 Datasheet HTML 13Page - STMicroelectronics UM1537 Datasheet HTML 14Page - STMicroelectronics UM1537 Datasheet HTML 15Page - STMicroelectronics UM1537 Datasheet HTML 16Page - STMicroelectronics UM1537 Datasheet HTML 17Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 13 / 52 page
background image
UM1537
Hardware layout and configuration
Doc ID 023059 Rev 1
13/52
2.3
Clock source
Two clock sources are available on the STM320518-EVAL evaluation board for
STM32F051R8T6 and RTC embedded.
X1, 8 MHz crystal with a socket for the STM32F051R8T6 microcontroller. It can be
removed from the socket when the internal RC clock is used.
X2, 32 kHz crystal for embedded RTC.
2.4
Reset source
The reset signal of the STM320518-EVAL evaluation board is low active and the reset
sources include the following.
Reset button B1
Debugging tools from SWD connector CN10 and CN9
Daughterboard from CN6
Embedded ST-LINK/V2
RS232 connector CN7 for ISP.
Note:
The jumper JP6 is to be closed for RESET handled by pin8 of the RS-232 connector CN7
(CTS signal). Refer to Section 2.7 information.
Table 5.
8 MHz crystal X1 related solder bridges
Jumper
Description
SB13
PF0 is connected to an 8 MHz crystal when SB13 is open (default setting).
PF0 is connected to an extension connector CN6 when SB13 is closed. In such a
case, C34 and X1 must be removed.
SB14
PF1 is connected to an 8 MHz crystal when SB14 is open (default setting).
PF1 is connected to an extension connector CN6 when SB14 is closed. In such a
case, R59 must be removed to avoid disturbance due to the 8 MHz quartz.
Table 6.
32 kHz crystal X2 related solder bridges
Jumper
Description
SB9
PC14 is connected to a 32 kHz crystal when SB9 is open (default setting).
PC14 is connected to an extension connector CN5 when SB9 is closed. In such a
case, R57 must be removed to avoid disturbance due to the 32 kHz quartz.
SB10
PC15 is connected to a 32 kHz crystal when SB10 is open (default setting).
PC15 is connected to an extension connector CN5 when SB10 is closed. In such a
case, R58 must be removed to avoid disturbance due to the 32 kHz quartz.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com