전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

UM1537 데이터시트(PDF) 14 Page - STMicroelectronics

부품명 UM1537
상세설명  STM320518-EVAL evaluation board
PDF  52 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

UM1537 데이터시트(HTML) 14 Page - STMicroelectronics

Back Button UM1537 Datasheet HTML 10Page - STMicroelectronics UM1537 Datasheet HTML 11Page - STMicroelectronics UM1537 Datasheet HTML 12Page - STMicroelectronics UM1537 Datasheet HTML 13Page - STMicroelectronics UM1537 Datasheet HTML 14Page - STMicroelectronics UM1537 Datasheet HTML 15Page - STMicroelectronics UM1537 Datasheet HTML 16Page - STMicroelectronics UM1537 Datasheet HTML 17Page - STMicroelectronics UM1537 Datasheet HTML 18Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 14 / 52 page
background image
Hardware layout and configuration
UM1537
14/52
Doc ID 023059 Rev 1
2.5
Boot option
The STM320518-EVAL evaluation board can boot from:
●
Embedded User Flash
●
System memory with boot loader for ISP
●
Embedded SRAM for debugging
The boot option is configured by setting switch SW1 (BOOT0) and one Option bit in the
Small Information block (SIF). The BOOT0 can also be configured via the RS-232 connector
CN7.
2.6
Audio
The STM320518-EVAL evaluation board supports a speaker that is connected to the DAC
output of the STM32F051R8T6 through an audio amplifier and microphone, which is in turn
connected to the ADC input of the STM32F051R8T6 through a microphone amplifier. The
speaker can be enabled or disabled by setting JP13 (Table 9).
Table 7.
Boot related switch
Switch
configuration
Bit12 in USER
OPTION BYTES
Boot source
0 <-> 1
X
STM320518-EVAL boot from User Flash when SW1 and
Bit12 in User OPTION bytes set as shown to the left (default
setting).
0 <-> 1
0
STM320518-EVAL boot from Embedded SRAM when SW1
and Bit12 in User OPTION bytes set as shown to the left.
0<-> 1
1
STM320518-EVAL boot from System Memory when SW1
and Bit12 in User OPTION bytes set as shown to the left.
Table 8.
Boot0 related jumpers
Jumper
Description
JP5
The Bootloader_BOOT0 is managed by pin 6 of connector CN7 (RS-232 DSR
signal) when JP5 is closed. This configuration is used for the boot loader application
only.
Default Setting: Not fitted
Table 9.
Audio related jumpers
Jumper
Description
JP13
Speaker amplifier U17 is enabled when JP13 is open (default setting).
Speaker amplifier U17 is disabled when JP13 is closed.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com