LQFP100 datasheet(87/116 Pages) STMICROELECTRONICS

87 / 116 page

DocID14619 Rev 13

87/116

SPC560B40x/50x, SPC560C40x/50x

Package pinouts and signal descriptions

115

3.27

On-chip peripherals

3.27.1

Current consumption

IINJ

— Input current Injection

Current

injection on

one ADC input,

different from

the converted

one

VDD = 

3.3 V ± 10%

5—

VDD = 

5.0 V ± 10%

5—

| INL |

Absolute value for

integral non-linearity

No overload

—

0.5

1.5

LSB

| DNL |

Absolute differential

non-linearity

No overload

—

0.5

1.0

LSB

| EO |

Absolute offset error

—

0.5

—

LSB

| EG |

Absolute gain error

—

0.6

—

LSB

TUEp

Total unadjusted

error(7) for precise

channels, input only

pins

Without current injection

20.6

LSB

With current injection

33

TUEx

Total unadjusted

error(7) for extended

channel

Without current injection

31

LSB

With current injection

44

VDD = 3.3 V ± 10% / 5.0 V ± 10%, TA = 40 to 125 °C, unless otherwise specified.

Analog and digital VSS must be common (to be tied together externally).

VAINx may exceed VSS_ADC and VDD_ADC limits, remaining on absolute maximum ratings, but the results of the conversion

will be clamped respectively to 0x000 or 0x3FF.

Duty cycle is ensured by using system clock without prescaling. When ADCLKSEL = 0, the duty cycle is ensured by internal

divider by 2.

During the sampling time the input capacitance CS can be charged/discharged by the external source. The internal

resistance of the analog source must allow the capacitance to reach its final voltage level within ts. After the end of the

sampling time ts, changes of the analog input voltage have no effect on the conversion result. Values for the sample clock ts

depend on programming.

This parameter does not include the sampling time ts, but only the time for determining the digital result and the time to load

the result’s register with the conversion result.

Total Unadjusted Error: The maximum error that occurs without adjusting Offset and Gain errors. This error is a

combination of Offset, Gain and Integral Linearity errors.

Table 45. ADC conversion characteristics (continued)

Symbol

Parameter

Conditions(1)

Value

Uni

Min

Typ

Max

LQFP100 데이터시트(PDF) 87 Page - STMicroelectronics

LQFP100 데이터시트(HTML) 87 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL