STM8L151X6 datasheet(65/142 Pages) STMICROELECTRONICS

65 / 142 page

DocID15962 Rev 15

65/142

STM8L151x4/6, STM8L152x4/6

Electrical parameters

115

Table 16. Current characteristics

Symbol

Ratings

Max.

Unit

IVDD

Total current into VDD power line (source)

IVSS

Total current out of VSS ground line (sink)

IIO

Output current sunk by IR_TIM pin (with high sink LED driver

capability)

Output current sunk by any other I/O and control pin

Output current sourced by any I/Os and control pin

- 25

IINJ(PIN)

Injected current on true open-drain pins (PC0 and PC1)(1)

- 5 / +0

Injected current on five-volt tolerant (FT) pins (PA7 and PE0) (1)

1. Positive injection is not possible on these I/Os. A negative injection is induced by VIN<VSS. IINJ(PIN) must

never be exceeded. Refer to Table 15. for maximum allowed input voltage values.

- 5 / +0

Injected current on 3.6 V tolerant (TT) pins (1)

- 5 / +0

Injected current on any other pin (2)

A positive injection is induced by VIN>VDD while a negative injection is induced by VIN<VSS. IINJ(PIN) must

never be exceeded. Refer to Table 15. for maximum allowed input voltage values.

- 5 / +5

ΣIINJ(PIN)

Total injected current (sum of all I/O and control pins) (3)

3. When several inputs are submitted to a current injection, the maximum

ΣIINJ(PIN) is the absolute sum of the

positive and negative injected currents (instantaneous values).

± 25

Table 17. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

-65 to +150

° C

Maximum junction temperature

150

STM8L151x6 데이터시트(PDF) 65 Page - STMicroelectronics

STM8L151x6 데이터시트(HTML) 65 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL