STM32L162RC datasheet(31/123 Pages) STMICROELECTRONICS

31 / 123 page

DocID022881 Rev 10

31/123

STM32L162VC, STM32L162RC

3.20

Development support

3.20.1

Serial wire JTAG debug port (SWJ-DP)

The ARM SWJ-DP interface is embedded, and is a combined JTAG and serial wire debug

port that enables either a serial wire debug or a JTAG probe to be connected to the target.

The JTAG JTMS and JTCK pins are shared with SWDAT and SWCLK, respectively, and a

specific sequence on the JTMS pin is used to switch between JTAG-DP and SW-DP.

The JTAG port can be permanently disabled with a JTAG fuse.

3.20.2

Embedded Trace Macrocell™

The ARM® Embedded Trace Macrocell provides a greater visibility of the instruction and

data flow inside the CPU core by streaming compressed data at a very high rate from the

STM32L162xC device through a small number of ETM pins to an external hardware trace

port analyzer (TPA) device. The TPA is connected to a host computer using USB, Ethernet,

or any other high-speed channel. Real-time instruction and data flow activity can be

recorded and then formatted for display on the host computer running debugger software.

TPA hardware is commercially available from common development tool vendors. It

operates with third party debugger software tools.

STM32L162RC 데이터시트(PDF) 31 Page - STMicroelectronics