| 전자부품 데이터시트 검색엔진 |
|
CS5531-AS 데이터시트(PDF) 19 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS5531-AS 데이터시트(HTML) 19 Page - Cirrus Logic |
|
19 / 52 page ![]() CS5531/32/33/34 DS289PP5 19 2.2.2. Command Register Quick Reference D7(MSB) D6D5D4 D3D2 D1D0 0 ARA CS1 CS0 R/W RSB2 RSB1 RSB0 BIT NAME VALUE FUNCTION D7 Command Bit, C 0 1 Must be logic 0 for these commands. These commands are invalid if this bit is logic 1. D6 Access Registers as Arrays, ARA 0 1 Ignore this function. Access the respective registers, offset, gain, or channel-setup, as an array of regis- ters. The particular registers accessed are determined by the RS bits. The registers are accessed MSB first with physical channel 0 accessed first followed by physical channel 1 next and so forth. D5-D4 Channel Select Bits, CS1-CS0 00 01 10 11 CS1-CS0 provide the address of one of the two (four for CS5533/34) physical input channels. These bits are also used to access the calibration registers associated with the respective physical input channel. Note that these bits are ignored when reading data register. D3 Read/Write,R/W 0 1 Write to selected register. Read from selected register. D2-D0 Register Select Bit, RSB3-RSB0 000 001 010 011 101 110 111 Reserved Offset Register Gain Register Configuration Register Channel-Setup Registers Reserved Reserved D7(MSB) D6 D5D4 D3D2D1 D0 1 MC CSRP2 CSRP1 CSRP0 CC2 CC1 CC0 BIT NAME VALUE FUNCTION D7 Command Bit, C 0 1 These commands are invalid if this bit is logic 0. Must be logic 1 for these commands. D6 Multiple Conver- sions, MC 0 1 Perform fully settled single conversions. Perform conversions continuously. D5-D3 Channel-Setup Reg- ister Pointer Bits, CSRP 000 ... 111 These bits are used as pointers to the Channel-Setup registers. Either a single con- version or continuous conversions are performed on the channel setup register pointedto bythesebits. D2-D0 Conversion/Calibra- tion Bits, CC2-CC0 000 001 010 011 100 101 110 111 Normal Conversion Self-Offset Calibration Self-Gain Calibration Reserved Reserved System-Offset Calibration System-Gain Calibration Reserved |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |