| 전자부품 데이터시트 검색엔진 |
|
BQ40Z50-R2 데이터시트(PDF) 37 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
BQ40Z50-R2 데이터시트(HTML) 37 Page - Texas Instruments |
|
37 / 51 page ![]() 37 bq40z50-R2 www.ti.com SLUSCS4 – JUNE 2017 Product Folder Links: bq40z50-R2 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated Figure 34. Thermistor Drive 9.2.2.3.5 LEDs Three LED control outputs provide constant current sinks for the driving external LEDs. These outputs are configured to provide voltage and control for up to 5 LEDs. No external bias voltage is required. Unused LEDCNTL pins can remain open or they can be connected to VSS. The DISP pin should be connected to VSS, if the LED feature is not used. Figure 35. LEDs 9.2.2.3.6 Safety PTC Thermistor The bq40z50-R2 device provides support for a safety PTC thermistor. The PTC thermistor is connected between the PTC and BAT pins. It can be placed close to the CHG/DSG FETs to monitor the temperature. The PTC pin monitors the voltage at the pin and will trip if the thermistor resistance exceeds the defined threshold. A PTC fault is one of the permanent failure modes. It can only be cleared by a POR. To disable, connect PTC and PTCEN to VSS. Figure 36. PTC Thermistor |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |