| 전자부품 데이터시트 검색엔진 |
|
WM8255 데이터시트(PDF) 20 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
WM8255 데이터시트(HTML) 20 Page - Cirrus Logic |
|
20 / 49 page ![]() Production Data WM8255 w PD, Rev 4.7, August 2013 20 Figure 13 State Mapping Functionality STATERST = 11 STATE_0 SEQ_STATE = 00 STATE_1 SEQ_STATE = 01 STATE_2 SEQ_STATE = 10 STATE_3 SEQ_STATE = 11 STATE_0 SEQ_STATE = 00 STATE_1 SEQ_STATE = 01 STATERST = 01 Figure 14 Setting the Sequence Length with STATERST LED CURRENT DRIVE SEQUENCE SYNCHRONISATION AND PROGRESSION The trigger to progress the state machine through the sequence states is dependent on whether the LED driver is operating in colour mode or monochrome mode. COLOUR MODE In Colour Mode operation, LEDSTART and TG are used to synchronise and progress the sequence state machine. This allows a single LED change for each line scan. With both LEDSTART and TG high, the sequence state machine is synchronously set to STATE_0 by MCLK. With LEDSTART low and at the next high pulse of TG, the sequence state machine is progressed to the next state, STATE_1, by MCLK. This is repeated until the maximum number of states determined by STATERST has been reached. At this point the LED drive current will be switched away from the selected LED. The sequence state machine will be held in this state until restarted by LEDSTART and TG. If at any time both TG and LEDSTART are high, the sequence is synchronously set back to STATE_0 by MCLK. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |