Revision Ver 1.0 October 14, 1998

LM151X2

Liquid Crystal Display

Product Specification

General Descriptions

The LG Philips LCD model LM151X2 LCD is a Color Active Matrix Liquid Crystal Display with an integral

Cold Cathode Fluorescent Tube(CCFT) back light system. The matrix employs a-Si Thin Film Transistor

as the active element. It is a transmissive type display operating in the normally white mode. This TFT-

LCD has a 15.1 inch diagonally measured active display area with XGA resolution(768 vertical by 1024

horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are

arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 6-bit

gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors.

LM151X2 has been designed to apply the CMOS logic level interface.

The LM151X2 LCD is intended to support applications where high brightness, wide viewing angle, high

color saturation, and high color depth are very important. In combination with the vertical arrangement of

the sub-pixels, the LM151X2 characteristics provide an excellent flat panel display for office automation

products such as monitors.

General Display Characteristics

The following are general features of the model LM151X2 LCD;

Active display area

15.1 inches(38cm) diagonal

Outsize dimensions

352.6w * 265.0h * 18.5t(typ)mm (Without Inverter and User Connector)

Pixel pitch

0.30 mm x 0.30 mm

Pixel format

1024 horiz. By 768 vert. Pixels RGB vertical stripe arrangement

Color depth

6-bit, 262,144 colors

Display operating mode

transmissive mode, normally white

Surface treatments

hard coating(3H), anti-glare treatment of the front polarizer

Source driver circuit

TFT-LCD

(1024

×768)

Timing

Control

Block

Power

Block

Backlight Ass’y

CN2

CN3

Alpha Point Ltd.

P.O. Box 41

00751 Helsinki, Finland

http://www.alpha.fi

Tel.: +358-9-34 64 34 1

Fax: +358-9-34 64 34 2