| 전자부품 데이터시트 검색엔진 |
|
TAS5755MDFDR 데이터시트(PDF) 6 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TAS5755MDFDR 데이터시트(HTML) 6 Page - Texas Instruments |
|
6 / 76 page ![]() 6 TAS5755M SLOS982 – AUGUST 2017 www.ti.com Product Folder Links: TAS5755M Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated Pin Functions (continued) PIN TYPE(1) DESCRIPTION NAME NO. VREG 42 P Digital regulator output. Not to be used for powering external circuitry. PowerPAD™ P Connect to GND for best system performance. If not connected to GND, leave floating. (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum conditions for extended periods may affect device reliability. (2) 5-V tolerant inputs are PDN, RESET, SCLK, LRCLK, MCLK, SDIN, SDA, and SCL. (3) Maximum pin voltage must not exceed 6 V. (4) DC voltage + peak ac waveform measured at the pin must be below the allowed limit for all conditions. 7 Specifications 7.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) MIN MAX UNIT Supply voltage DVDD, AVDD –0.3 4.2 V PVDD_x –0.3 30 V Input voltage 3.3-V digital input –0.5 DVDD + 0.5 V 5-V tolerant(2) digital input (except MCLK) –0.5 DVDD + 2.5(3) 5-V tolerant MCLK input –0.5 AVDD + 2.5(3) OUT_x to PGND_x 32(4) V BST_x to PGND_x 39(4) V Input clamp current, IIK –20 20 mA Output clamp current, IOK –20 20 mA Operating free-air temperature 0 85 °C Operating junction temperature 0 150 °C Storage temperature, Tstg –40 125 °C (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 7.2 ESD Ratings VALUE UNIT V(ESD) Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±1000 V Charged-device model (CDM), per JEDEC specification JESD22- C101(2) ±250 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |