• 1200 V blocking voltage
• 3.5 mΩ of typical RDS(on)
• Maximum operative junction temperature TJop = 175 °C
• Very low switching energy
• Low inductive compact design for an higher power density
• Si3N4 AMB substrate to improve thermal performance
• SiC Power MOSFET chip sintered to substrate for improved lifetime
• 4.2 kV DC 1 s insulation
• Direct cooled Cu base plate with pin fins
• Three integrated NTC temperature sensors

Description
The ACEPACK DRIVE is a compact six pack module optimized for hybrid and electric
vehicles traction inverter. This power module features switches based on silicon
carbide Power MOSFET 2nd generation, are characterized by very low RDS(on), very
limited switching losses and outstanding performances in synchronous rectification
working mode. This will ensure superb efficiency in final application, saving battery
recharging cycles.
A copper base plate with pin-fin base structure make direct fluid cooling available for
this power module minimizing thermal resistance.
A dedicated pin-out has been developed to get the best sw

Application
• Main inverter (electric traction)