| 전자부품 데이터시트 검색엔진 |
|
DS31256 데이터시트(PDF) 101 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
DS31256 데이터시트(HTML) 101 Page - Maxim Integrated Products |
|
101 / 183 page ![]() DS31256 256-Channel, High-Throughput HDLC Controller 101 of 183 Register Name: RDQFFT Register Description: Receive Done-Queue FIFO Flush Timer Register Address: 0744h Bit # 7 6 5 4 3 2 1 0 Name TC7 TC6 TC5 TC4 TC3 TC2 TC1 TC0 Default 0 0 0 0 0 0 0 0 Bit # 15 14 13 12 11 10 9 8 Name TC15 TC14 TC13 TC12 TC11 TC10 TC9 TC8 Default 0 0 0 0 0 0 0 0 Note: Bits that are underlined are read-only, all other bits are read-write. Bits 0 to 15/Receive Done-Queue FIFO Flush Timer Control Bits (TC0 to TC15). Please note that on system reset, the timer is set to 0000h, which is defined as an illegal setting. If the receive done-queue FIFO is to be activated (RDQFE = 1), then the host must first configure the timer to a proper state and then set the RDQFE bit to one. 0000h = illegal setting 0001h = timer count resets to 1 FFFFh = timer count resets to 65,536 Register Name: RDMAQ Register Description: Receive DMA Queues Control Register Address: 0780h Bit # 7 6 5 4 3 2 1 0 Name n/a n/a RDQF RDQFE RFQSF RFQLF n/a RFQFE Default 0 0 0 0 0 0 0 0 Bit # 15 14 13 12 11 10 9 8 Name n/a n/a n/a n/a n/a RDQT2 RDQT1 RDQT0 Default 0 0 0 0 0 0 0 0 Note: Bits that are underlined are read-only, all other bits are read-write. Bit 0/Receive Free-Queue FIFO Enable (RFQFE). See Section 9.2.3 for details. Bit 2/Receive Free-Queue Large Buffer FIFO Flush (RFQLF). See Section 9.2.3 for details. Bit 3/Receive Free-Queue Small Buffer FIFO Flush (RFQSF). See Section 9.2.3 for details. Bit 4/Receive Done-Queue FIFO Enable (RDQFE). To enable the DMA to burst write descriptors to the done queue, this bit must be set to 1. If this bit is set to 0, messages are written one at a time. 0 = done-queue burst-write disabled 1 = done-queue burst-write enabled Bit 5/Receive Done-Queue FIFO Flush (RDQF). When this bit is set to 1, the internal done-queue FIFO is flushed by sending all data into the done queue. This bit must be set to 0 for proper operation. 0 = FIFO in normal operation 1 = FIFO is flushed |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |