L9678P datasheet(91/203 Pages) STMICROELECTRONICS

91 / 203 page

DocID029274 Rev 3

91/203

L9678P, L9678P-S

SPI interface

202

5.1.34

Remote sensor data/fault registers w/o fault (RSDRx)

Remote sensor 0 data and fault flag register (RSDR0)

Remote sensor 1 data and fault flag register (RSDR1)

Note:

The value in Bit15 (FLT) will re-define the use of the other bits, hence the information below

is divided into two groups.

Bit 15 = 0 NO FAULT condition

Address:

50 (RSDR0)



51 (RSDR1)

Type:

Buffer:

$5000 (RSDR0)



$5100 (RSDR1)

Reset:

MOSI

MISO

CRC[2:0] 000 000 000 CRC based on bits [16:0]

Updated based on bits [16:0]

FLT 1

1 Fault Status - Depending on Fault Status, the DATA bits are defined differently

Cleared when all of the following bits are '0': STG, STB, CURRENT_HI,

OPENDET, RSTEMP, NODATA

Set when any of the following bits are '1': STG, STB, CURRENT_HI,

OPENDET, RSTEMP, NODATA

0 No fault

1 Fault

On/Off 0

0 Channel On/Off Status

Cleared by SSM_RESET or when channel is commanded OFF via SPI

RSCTRL or when the STG bit is set or the RSTEMP bit is set

Set when channel is commanded ON by SPI RSCTRL

0 Off

1 On

LCID[0:3] 0000 0000 0000 Logical Channel ID

L9678P 데이터시트(PDF) 91 Page - STMicroelectronics

L9678P 데이터시트(HTML) 91 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL