| 전자부품 데이터시트 검색엔진 |
|
ST33TPHF20SPI 데이터시트(PDF) 17 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST33TPHF20SPI 데이터시트(HTML) 17 Page - STMicroelectronics |
|
17 / 47 page ![]() FIPS140-2 SECURITY POLICY Page 17 of 47 NON-PROPRIETARY DOCUMENT 1.7.1 Security module configuration 1.7.1.1 AAF0 / AHB3 / AHB7 These security module configurations implement both TPM1.2 and TPM2.0 specifications and are set to operate by default in TPM1.2 mode. To set and irreversibility lock the security module in the TPM2.0 mode, TPM operator shall: Execute the TPM_SetMode proprietary command with the following parameters: o mode = 0x01 (TPMLib SET to switch to TPM2.0) o modeLock = 0x01 (TPMLibLock SET to lock the selected mode) Reset the TPM 1.7.1.2 AAF1 / AHB4 / AHB8 These security module configurations implement both TPM1.2 and TPM2.0 specifications and are set to operate by default in TPM2.0 mode. To irreversibility lock the security module in the TPM2.0 mode, TPM operator shall: Execute the TPM2_SetMode proprietary command with the following parameters: o mode = 0x01 (TPMLib SET to maintain the module in TPM2.0 mode) o modeLock = 0x01 (TPMLibLock SET to lock the selected mode) Reset the TPM 1.7.1.3 AAF3 / AHB9 No action requested for these security modules configurations. 1.7.2 Approved modes of operation TPM supports 2 sequential approved modes of operation. 1.7.2.1 Approved mode 1 This mode is the default mode when TPM starts. This mode is limited to a subset of TPM services. Table 12: Approved mode 1 Properties Description Definition Transient mode of operation when TPM is power-up and before TPM2_SelfTest(full=YES) execution Configuration No configuration required Services available List of available services is indicated in last column of Table 18: Command support table. Algorithms used SHA / HMAC / AES / DRBG / KDF / TDES CSPs used List of CSPs that might be accessed in this mode is indicated in Table 18: Command support table. Self-tests SHS / HMAC / AES / DRBG / KDF / TDES / HW integrity / FW integrity / NDRNG 1.7.2.2 Approved mode 2 This mode is the full FIPS approved mode of operation. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |