TFP503PZP datasheet(19/27 Pages) TI

19 / 27 page

TFP503

PanelBus HDCP DIGITAL RECEIVER

SLDS149 − AUGUST 2004

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

I2C register map (continued)

VEN_ID

Subaddress = C0

Read Only

Default = 4C

VEN_ID[7:0]

Subaddress = C1

Read Only

Default = 01

VEN_ID[15:8]

This read-only register contains the 16-bit Texas Instruments vendor ID for the TFP503. VEN_ID[15:0] is

hardwired to 0x014C.

DEV_ID

Subaddress = C2

Read Only

Default = 01

DEV_ID[7:0]

Subaddress = C3

Read Only

Default = 05

DEV_ID[15:8]

This read-only register contains the 16-bit device ID for the TFP503. DEV_ID[15:0] is hardwired to 0x0501.

REV_ID

Subaddress = C4

Read Only

Default = 01

REV_ID[7:0]

This read-only register contains the 8-bit revision ID for the TFP503. REV_ID[7:0] is hardwired to 0x01.

I2C interface

The I2C interface accesses the internal TFP503 registers. This two-terminal interface consists of one clock line,

DDC_SCL, and one serial data line, DDC_SDA. The basic I2C access cycles are shown in Figures 16 and 17.

DDC_SDA

Start Condition (S)

Stop Condition (P)

DDC_SCL

Figure 16. I2C Start and Stop Conditions

The basic access cycle consists of the following:

D A start condition

D A slave address cycle

D A subaddress cycle

D Any number of data cycles

D A stop condition

TFP503PZP 데이터시트(PDF) 19 Page - Texas Instruments

TFP503PZP 데이터시트(HTML) 19 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

데이터시트 다운로드

링크 URL