| 전자부품 데이터시트 검색엔진 |
|
AT21CS01 데이터시트(PDF) 35 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
AT21CS01 데이터시트(HTML) 35 Page - Microchip Technology |
|
35 / 47 page ![]() opcode of 1010b (Ah), the appropriate slave address combination, and the Read/Write bit set as a logic ‘0’. Since a memory address has not been input at this point in the sequence, the device returns an ACK. Next, the 8 ‑bit word address is sent which will result in an ACK from the device, regardless if that address is in a memory zone that has been set to ROM. However, upon sending the data input byte, a Write command to an address that was in a memory zone that was set to ROM will result in a NACK response from the AT21CS01/11 and the device will be immediately ready to accept a new command. If the address being written was in a memory zone that had not been set to ROM, the device will return an ACK to the data input byte as per normal operation for write operations as described in Write Operations. AT21CS01/AT21CS11 © 2017 Microchip Technology Inc. Datasheet DS20005857A-page 35 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |