| 전자부품 데이터시트 검색엔진 |
|
STM32F334C8U6TR 데이터시트(PDF) 95 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F334C8U6TR 데이터시트(HTML) 95 Page - STMicroelectronics |
|
95 / 125 page ![]() DS9994 Rev 9 95/125 STM32F334x4 STM32F334x6 STM32F334x8 Electrical characteristics 103 EL Integral linearity error ADC clock freq. ≤ 72 MHz, Sampling freq. ≤ 5 Msps 2.0 V ≤ VDDA ≤ 3.6 V Single ended Fast channel 5.1 Ms - ±3 LSB Slow channel 4.8 Ms - ±3.5 Differential Fast channel 5.1 Ms - ±2 Slow channel 4.8 Ms - ±2.5 ENOB (5) Effective number of bits Single ended Fast channel 5.1 Ms 10.4 - bits Slow channel 4.8 Ms 10.4 - Differential Fast channel 5.1 Ms 10.8 - Slow channel 4.8 Ms 10.8 - SINAD (5) Signal-to- noise and distortion ratio Single ended Fast channel 5.1 Ms 64 - dB Slow channel 4.8 Ms 63 - Differential Fast channel 5.1 Ms 67 - Slow channel 4.8 Ms 67 - SNR(5) Signal-to- noise ratio ADC clock freq. ≤ 72 MHz, Sampling freq ≤ 5 Msps, 2.0 V ≤ VDDA ≤ 3.6 V Single ended Fast channel 5.1 Ms 64 - Slow channel 4.8 Ms 64 - Differential Fast channel 5.1 Ms 67 - Slow channel 4.8 Ms 67 - THD(5) Total harmonic distortion Single ended Fast channel 5.1 Ms - -75 Slow channel 4.8 Ms - -75 Differential Fast channel 5.1 Ms - -79 Slow channel 4.8 Ms - -78 1. ADC DC accuracy values are measured after internal calibration. 2. ADC accuracy vs. negative Injection Current: Injecting negative current on any analog input pins must be avoided as this significantly reduces the accuracy of the conversion being performed on another analog input. It is recommended to add a Schottky diode (pin to ground) to analog pins which may potentially inject negative current. Any positive injection current within the limits specified for IINJ(PIN) and ΣIINJ(PIN) in Section 6.3.14 does not affect the ADC accuracy. 3. Better performance may be achieved in restricted VDDA, frequency and temperature ranges. 4. Data based on characterization results, not tested in production. 5. Value measured with a -0.5 dB full scale 50 kHz sine wave input signal. Table 67. ADC accuracy (1)(2)(3) (continued) Symbol Parameter Conditions Min.(4) Max.(4) Unit |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |