| 전자부품 데이터시트 검색엔진 |
|
LTM4677 데이터시트(PDF) 79 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
LTM4677 데이터시트(HTML) 79 Page - Analog Devices |
|
79 / 110 page ![]() LTC3888-1 79 Rev. 0 For more information www.analog.com MFR_PWM_MODE_LTC3888-1 The MFR_PWM_MODE_LTC3888-1 command sets important PWM controls for each master channel. The addressed channel(s) must be turned off by its RUN pin, OPERATION command, or their combination when this command is issued. Otherwise the LTC3888-1 will NACK the command byte, ignore the command and its data, and assert a BUSY fault. Bit Definitions BIT MEANING 7 (Reserved) 6 Enable VOUT servo. (VOUT_LOOP_SCALE should be programmed first.) 5 (Reserved, must write as 0) 4 Error Amplifier Disable: 0: Error Amplifier output (ITH) enabled. Channel operates as voltage loop master. 1: Error Amplifier output disabled (ITH high-Z input). Channel operates as slave phase to another master. 3 (Reserved) 2 (Reserved) 1 tON_MIN Control: 0: Minimum PWM On Time Set by Controller (can be < 30ns). 1: Minimum PWM On Time Limited to ≥ 30ns. 0 Power Stage UV HW Response: (see Applications Information for exceptions) 0: Rail ignores any UV indication on shared TEMP/FAULT bus. 1: Rail is latched off if UV is indicated on the shared TEMP/FAULT bus while operating. (WARNING: Not all power stages support this feature.) This command has one data byte. PMBus COMMAND DETAILS (PWM Configuration) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |