 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
LTM4677 데이터시트(PDF) 84 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
LTM4677 데이터시트(HTML) 84 Page - Analog Devices |
|
|
84 / 110 page  LTC3888-1 84 Rev. 0 For more information www.analog.com PMBus COMMAND DETAILS (Output Voltage and Limits) VOUT_UV_WARN_LIMIT The VOUT_UV_WARN_LIMIT command sets the value, in volts, of the VSENSE± differnetial voltage measured by the ADC that causes an output undervoltage warning. If the VOUT_UV_WARN_LIMIT is exceeded, the device: • Sets the VOUT Bit in the STATUS_WORD • Sets the VOUT Undervoltage Warning Bit in the STATUS_VOUT Command • Notifies the Host by Asserting ALERT, Unless Masked This command has two data bytes in Linear_16u format. VOUT_UV_FAULT_LIMIT The VOUT_UV_FAULT_LIMIT command sets the value of VFB (or VOUT if VOUT_SCALE_LOOP has been defined), in volts, that causes an output undervoltage fault. If VOUT_UV_FAULT_LIMIT is modified while the channel is on, 2ms should be allowed for the new value to take effect. Modifying VOUT during that time can result in an erroneous UV fault. The LTC3888-1 sets MFR_COMMON bits[6:5] low while a new VOUT_UV_FAULT_LIMIT is established. Execution of this command is delayed if VOUT_SCALE_LOOP is being processed. This command has two data bytes in Linear_16u format. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
