| 전자부품 데이터시트 검색엔진 |
|
24CS512 데이터시트(PDF) 34 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
24CS512 데이터시트(HTML) 34 Page - Microchip Technology |
|
34 / 66 page ![]() 24CS512 DS20005769C-page 34 2018-2021 Microchip Technology Inc. 10.4.2 DETERMINING THE LOCK STATE OF THE SECURITY REGISTER The check lock operation follows the same sequence as the lock operation (including ‘0110b’ in the A11 through A8 bits of the word address) with the exception that only the device address byte and the first word address byte (byte 0) need to be transmitted to the device. An ACK response to the word address byte indicates the lock has not been set while a NACK response indicates the lock has been set. If the lock has already been set, it cannot be undone. The check lock operation is completed by the host sending a Stop condition to the device. This sequence is shown in Figure 10-4. FIGURE 10-4: DETERMINING THE SECURITY REGISTER LOCK STATE Note: Only the device address byte and the first word address byte (byte 0) should be sent to determine the lock state of the Security register. Sending the second word address byte (byte 1) and a data byte can inadvertently lock the Security register. MSb MSb 12 3 4 5 6 7 8 91 2 3 4 5 6 7 8 9 Device Address Byte Word Address – Byte 0 10 1 1 0 0x x x x A2 A1 A0 01 10 0/1 ACK from Client if Unlocked ACK from Client Start by Host Stop by Host NACK from Client if Locked |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |