STM32CUBEL4 datasheet(30/37 Pages) STMICROELECTRONICS

30 / 37 page

Demonstration firmware settings

UM1919

30/37

DocID028080 Rev 1

5.6

Programming firmware application

First of all, install the ST-LINK/V2.1 driver available on ST website.

There are two ways of programming the STM32L476G discovery board.

5.6.1

Using binary file

Upload the binary STM32CubeDemo_STM32L476G-Discovery-VX.Y.Z.hex from the

firmware package available under Projects\STM32L476G-Discovery\Demonstrations\Binary

using your preferred in-system programming tool.

5.6.2

Using preconfigured projects

Choose one of the supported tool chains and follow the steps below:

•

Open the application folder: Projects\STM32L476G-Discovery \Demonstrations\

•

Chose the desired IDE project (EWARM for IAR, MDK-ARM for Keil)

•

Double click on the project file (for example Project.eww for EWARM)

•

Rebuild all files: Go to Project and select Rebuild all

•

Load the project image: Go to Project and select Debug

•

Run the program: Go to Debug and select Go

The demonstration software as well as other software examples that allow the user to

discover the STM32 microcontroller features are available on ST website at

STM32CUBEL4 데이터시트(PDF) 30 Page - STMicroelectronics