SPC58NH84C3 datasheet(86/147 Pages) STMICROELECTRONICS

86 / 147 page

Electrical characteristics

SPC58EHx, SPC58NHx

86/147

DS12304 Rev 5

4.16.2.1

DSPI master mode full duplex timing with CMOS pads

4.16.2.1.1 DSPI CMOS master mode – classic timing

Note:

In the following table, all output timing is worst case and includes the mismatching of rise

and fall times of the output pads.

Table 43. DSPI channel frequency support

DSPI use mode(1)

Max usable

frequency

(MHz)(2),(3)

CMOS (Master

mode)

Full duplex – Classic timing (Table 44)

DSPI_0, DSPI_1,

DSPI_2, DSPI_3,

DSPI_6, DSPI_7,

DSPI_8, DSPI_9

DSPI_4, DSPI_5

Full duplex – Modified timing (Table 45)

DSPI_0, DSPI_1,

DSPI_2, DSPI_3,

DSPI_6, DSPI_7,

DSPI_8, DSPI_9

DSPI_4, DSPI_5

Output only mode (SCK/SOUT/PCS) (Table 44 and

Table 45)

DSPI_0, DSPI_1,

DSPI_2, DSPI_3,

DSPI_6, DSPI_7,

DSPI_8, DSPI_9

DSPI_4, DSPI_5

Output only mode TSB mode (SCK/SOUT/PCS)

DSPI_0, DSPI_1,

DSPI_2, DSPI_3,

DSPI_6, DSPI_7,

DSPI_8, DSPI_9

DSPI_4, DSPI_5

CMOS (Slave mode Full duplex) (Table 46)—

1. Each DSPI module can be configured to use different pins for the interface. Refer to the device pinout Microsoft Excel file

attached to the IO_Definition document for the available combinations. It is not possible to reach the maximum

performance with every possible combination of pins.

2. Maximum usable frequency can be achieved if used with fastest configuration of the highest drive pads.

3. Maximum usable frequency does not take into account external device propagation delay.

SPC58NH84C3 데이터시트(PDF) 86 Page - STMicroelectronics

SPC58NH84C3 데이터시트(HTML) 86 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL