SH79F6489PSLASH080PR datasheet(53/152 Pages) SINOWEALTH

53 / 152 page

SH79F6488/SH79F6489

Mode1: 16-bit auto-reload Timer

Timer2 can be programmed to count up or down when configured in its 16-bit auto-reload mode. This feature is invoked by the

DCEN (Down Counter Enable) bit in T2MOD. After reset, the DCEN bit is set to 0 so that Timer2 will default to count up. When

DCEN is set, Timer2 can count up or down, depending on the value of the T2EX pin.

When DCEN = 0, two options are selected by bit EXEN2 in T2CON.

If EXEN2 = 0, Timer2 counts up to 0FFFFH and then sets the TF2 bit upon overflow. The overflow also causes the timer

registers to be reloaded with the 16-bit value in RCAP2H and RCAP2L, which are pressed by software.

If EXEN2 = 1, a 16-bit reload can be triggered either by an overflow or by a 1-to-0 transition at external input T2EX. This

transition also sets the EXF2 bit. Both the TF2 and EXF2 bits can generate an interrupt if ET2 is enabled.

TF2

C/T2

The Block Diagram of Auto Relode Mode (Mode 1)of Timer2 (DCEN=0)

RCAP2L

RCAP2H

EXF2

0:Switch Off

1:Switch On

Increment Mode

0:Switch Off

1:Switch On

External Falling

Edge flag

TL2

TH2

T2EX

Interrupt

Request

Overflow

Flag

TR2

EXEN2

System Clock

Setting the DCEN bit enables Timer2 to count up or down. When DCEN = 1, the T2EX pin controls the direction of the count,

and EXEN2’s control is invalid.

A logical “1” at T2EX makes Timer2 count up. The timer will overflow at 0FFFFH and set the TF2 bit. This overflow also causes

the 16-bit value in RCAP2H and RCAP2L to be reloaded into the timer registers, TH2 and TL2, respectively.

A logical “0” at T2EX makes Timer2 count down. The timer underflows when TH2 and TL2 equal the values stored in RCAP2H

and RCAP2L. The underflow sets the TF2 bit and causes 0FFFFH to be reloaded into the timer registers.

The EXF2 bit toggles whenever Timer2 overflows or underflows and can be used as a 17th bit of resolution. In this operating

mode, EXF2 does not flag an interrupt.

TF2

TR2

C/T2

The Block Diagram of Auto-Reload Mode ( Mode 1) of Timer2 (DCEN=1)

T2EX

EXF2

Toggle

1.T2EX=1， Timer2 is up counter

2.T2EX=0， Timer2 is down counter

System

Clock

TL2

TH2

RCAP2L

RCAP2H

FFH

0:Switch Off

1:Switch On

Overflow

Flag

Interrupt

Request

SH79F6489P/080PR 데이터시트(PDF) 53 Page - SINOWEALTH Electronic Ltd

SH79F6489P/080PR 데이터시트(HTML) 53 Page - SINOWEALTH Electronic Ltd

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL