B7AH-R6D53 datasheet(108/121 Pages) OMRON

108 / 121 page

B7A

106

Recommended Cables

For B7A with Normal I/O Delay

Cabtire Cable

When a single power supply is connected to either the Input Termi-

nal or Output Terminal:

VCTF 0.75 x 4 C (B7AM)

VCTF 0.75 x 3 C (B7A/S/C)

When independent power supplies are connected to both Link Ter-

minals:

VCTF 0.75 x 3 C (B7AM)

VCTF 0.75 x 2 C (B7A/S)

The following cable can also be used.

Twisted Pair Wire

When a single power supply is connected to either the Input Termi-

nal or Output Terminal, the thickness of the wire must be 0.75 mm2

or greater.

Transmission distance: 100 m max.

For B7A with Short I/O Delay

Shielded Wire

Use a shielded wire with a thickness of 0.75 mm2 min.

Color

Screw Terminal Models

Marked “IN” in white

ink. The background is

red.

Input Terminal

Output Terminal

Marked “OUT” in black ink.

The background is yellow.

Mounting

To mount the Input or Output Terminal to a DIN track, hook the upper

part (part (A) in the illustration) of the Input or Output Terminal on the

DIN track first. Then press the Input or Output Terminal in the (B)

direction.

(A)

(B)

When mounting more than two Input or Output Terminals side by

side, leave a space of 3 mm minimum between each Terminal.

It is recommended that PFP-S Spacers be used to secure a space

of 3 mm between each Input or Output Terminal.

3mm min.

Insert a flat-blade screwdriver to part (C) to dismount the Input or

Output Terminal from a DIN track.

(C)

30mm min.

Rail stopper

B7AH-R6D53 데이터시트(PDF) 108 Page - Omron Electronics LLC

B7AH-R6D53 데이터시트(HTML) 108 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL