| 전자부품 데이터시트 검색엔진 |
|
ATECC608A 데이터시트(PDF) 40 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
ATECC608A 데이터시트(HTML) 40 Page - Microchip Technology |
|
40 / 81 page ![]() ...........continued Name Mode Size Description Response 0x0C 32 bytes Shared Master Secret as clear text Response OutNonce 0x0E 32 bytes 32 bytes Shared Master Secret as encrypted text nonce used for encryption Response 0x08 1 byte 0x00 if successful, otherwise an error code is returned 5.2.1.2 ECDH - TempKey Source The ECDH command may use the value in TempKey as its starting value for an ECDH command. The ECC private key value in TempKey must be generated by the GenKey command. Once the TempKey has been used by the ECDH command, the TempKey.Valid flag is reset. If the output is back to the TempKey location, then this flag will be set again. Table 5-40. Input Parameters ECDH TempKey Opcode (1 Byte) Mode (1 Byte) KeyId (2 Bytes) Data Description Data 1 (32 Bytes) Data 2 (32 Bytes) 0x43 0x0D 0x00 00 X component of public key Y component of public key • Results sent to the output buffer • Output is in the clear(1) 0x0F 0x00 00 X component of public key Y component of public key • Results sent to the output buffer • Output is encrypted 0x09 0x00 00 X component of public key Y component of public key • Results stored in TempKey • Output is available for other operations but is not directly accessible. 0x05 0x00 0[Slot] X component of public key Y component of public key • Results stored in specified slot Note: 1. When the ChipOptions.ECDHPROT value is 1, then the output of the ECDH command will be encrypted in this mode. For the ATECC608A-TNGLoRaWAN the ECDHPROT field is set to 0 and encryption will be dependent upon the mode of the ECDH command. Table 5-41. Output Response ECDH TempKey Name Mode Size Description Response 0x0D or 0x0F 1 byte Error code if command fails Response 0x0D 32 bytes Shared Master Secret as clear text Response OutNonce 0x0F 32 bytes 32 bytes Shared Master Secret as encrypted text nonce used for encryption Response 0x05 or 0x09 1 byte 0x00 if successful, otherwise an error code is returned ATECC608A-TNGLoRaWAN Device Commands © 2020 Microchip Technology Inc. Complete Datasheet DS40002154B-page 40 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |