| 전자부품 데이터시트 검색엔진 |
|
STM32U545NET3QTR 데이터시트(PDF) 25 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32U545NET3QTR 데이터시트(HTML) 25 Page - STMicroelectronics |
|
25 / 283 page ![]() DS14216 Rev 1 25/283 STM32U545xx Functional overview 88 3.4.2 Additional flash memory protections when TrustZone activated When the TrustZone security is enabled through option bytes, the whole flash memory is secure after reset and the following protections are available: • non-volatile watermark-based secure flash memory area The secure area can be accessed only in Secure mode. One area per bank can be selected with a page granularity. • secure HDP (hide protection area) It is part of the flash memory secure area and can be protected to deny an access to this area by any data read, write and instruction fetch. For example, a software code in the secure flash memory hide protection area can be executed only once and deny any OTP 0.5 Yes Yes(7) N/A Yes Yes(7) N/A 1Yes Yes(7) N/A Yes Yes(7) N/A 2Yes Yes(7) N/A N/A N/A N/A Backup registers 0.5 Yes Yes N/A Yes(2) Yes(2) N/A(8) 1 Yes Yes N/A No No N/A(8) 2 Yes Yes N/A N/A N/A N/A SRAM2/backup RAM 0.5 Yes Yes N/A Yes(2) Yes(2) N/A(9) 1 Yes Yes N/A No No N/A(9) 2 Yes Yes N/A N/A N/A N/A OTFDEC regions (Octo-SPI) 0.5 Yes Yes Yes No(10) Yes Yes 1 Yes Yes Yes No(10) Yes Yes 2 Yes Yes Yes N/A N/A N/A 1. When the protection level 2 is active, the debug port and the bootloader mode are disabled. 2. Depends on TrustZone security access rights. 3. The system memory is only read-accessible, whatever the protection level (0, 1 or 2) and execution mode. 4. Option bytes are only accessible through the flash memory registers and OPSTRT bit. 5. The flash main memory is erased when the RDP option byte regresses from level 1 to level 0. 6. SWAP_BANK option bit can be modified. 7. OTP can only be written once. 8. The backup registers are erased when RDP changes from level 1 to level 0. 9. All SRAMs are erased when RDP changes from level 1 to level 0. 10. The OTFDEC keys are erased when the RDP option byte changes from level 1 to level 0. Table 4. Access status versus protection level and execution modes when TZEN = 1 (continued) Area RDP level User execution (boot from flash memory) Debug/ bootloader(1) Read Write Erase Read Write Erase |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |