 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
LPC804 데이터시트(PDF) 55 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LPC804 데이터시트(HTML) 55 Page - NXP Semiconductors |
|
|
55 / 89 page  LPC804 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2023. All rights reserved. Product data sheet Rev. 2.1 — 25 July 2023 55 of 87 NXP Semiconductors LPC804 32-bit Arm Cortex-M0+ microcontroller [9] A Fast-mode I2C-bus device can be used in a Standard-mode I2C-bus system but the requirement tSU;DAT = 250 ns must then be met. This will automatically be the case if the device does not stretch the LOW period of the SCL signal. If such a device does stretch the LOW period of the SCL signal, it must output the next data bit to the SDA line tr(max) + tSU;DAT = 1000 + 250 = 1250 ns (according to the Standard-mode I2C-bus specification) before the SCL line is released. Also the acknowledge timing must meet this set-up time. Fig 26. I2C-bus pins clock timing aaa-004643 tf 70 % 30 % SDA tf 70 % 30 % S 70 % 30 % 70 % 30 % tHD;DAT SCL 1 / fSCL 70 % 30 % 70 % 30 % tVD;DAT tHIGH tLOW tSU;DAT |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
