SIM800 datasheet(53/380 Pages) SIMCOM

53 / 380 page

Smart Machine Smart Decision

SIM800 Series_AT Command Manual_V1.09

2015-08-03

3 space (0)

Parameter Saving

Mode

AT&W_SAVE

Max

Response

Time

Reference

V.25ter

Note

The Command is applied for Command state;

In <format> parameter, "0 parity" means no parity;

The <parity> field is ignored if the <format> field specifies no parity and

string "+ICF: <format>,255" will be response to AT+ICF? Command.

2.2.40 AT+IFC

Set TE-TA Local Data Flow Control

AT+IFC

Set TE-TA Local Data Flow Control

Response

+IFC:

(list

supported

<dce_by_dte>s),(list

supported

<dte_by_dce>s)

Test Command

AT+IFC=?

Parameters

See Write Command

Response

+IFC: <dce_by_dte>,<dte_by_dce>

Read Command

AT+IFC?

Parameters

See Write Command

Response

This parameter setting determines the data flow control on the serial

interface for data mode.

Write Command

AT+IFC=<dce_b

y_dte>[,<dte_by

_dce>]

Parameters

<dce_by_dte>

Specifies the method will be used by TE at receive of

data from TA

0 No flow control

1 Software flow control

2 Hardware flow control

<dte_by_dce>Specifies the method will be used by TA at receive of data

from TE

0 No flow control

1 Software flow control

2 Hardware flow control

SIM800 데이터시트(PDF) 53 Page - SIMCom

SIM800 데이터시트(HTML) 53 Page - SIMCom

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL